DAP D2030 MFX128
Stereo DSP Processor 24-bit Sigma-Delta AD/DA Converter 48 kHz Sampling rate
• Graphic Equaliser Stereo 2 x 15 Bands,
Mono 1 x 31 Bands
• Compressor / Limiter
• Noise gate
• Multi effects: Distortion / Filter, Pitch Shift,
Chorus / Flanging / Short Delay, Reverb/
Echo / Gate, many effect combinations
• 128 pre-programmed effects
• All parameters adjustable
• 10 user-defined store places
• S/P DIF Coax (RCA) Input and Output
• MIDI IN-OUT-THRU Interface
• Big LCD Display: 2 x 16 characters
Analog Inputs
Connectors: XLR and 1/4" jack
Type: balanced
Impedance: 40 kilo-Ohm balanced,
20 kilo-Ohm unbalanced
Input Level Adjuster: -20 dB ~ +4 dB
Max. Input Level: +7V pp
Analog Outputs
Connectors: XLR and 1/4" jack
Type: Electronically Servo-balanced Output
Impedance: <100 Ohm
Max. Output Level: +10d B, load in 600 Ohm
Freq. response: 20 Hz ~ 20 kHz, ±0.25 dB
THD: <0,01% @ 1 kHz,
Input Level +8 dB
Channel Separation: >80 dB, 20 Hz ~ 20 kHz Input
Level +8 dB
Noise Gate: -66 dB ~ -24 dB
Compressor
Threshold: -48 dB ~ 0 dB, 1.5 dB step
Ratio: 1.0 ~ Limit
Attack time: 1.3 ms ~ 500 ms
Decay time: 1.3 ms ~ 500 ms
Boost Gain: x1, x2, x4, x8
Equaliser
Mono mode: 2 x 31 Band ISO Frequency
Equaliser, ±15 dB boost/cut gain,
1 dB step
Stereo: 2 x 15 Band
Interface: 5-pin DIN-socket MIDI IN
(RS232 IN)/MIDI OUT/MIDI THRU)
Digital Process
AD/DA: 24 bit Sigma-Delta
Sampling Rate: 48 kHz
S/PDIF: Coaxial: Input Impedance:
75 Ohm, Output Impedance 75 Ohm
Display: 2 x 16 LCD with Backlit
Power Supply: ~100-120 VAC; 200-240VAC
Fuse: 100-120 VAC: 630 mA (slow-blow); 200
-240 VAC: 315 mA (slow-blow)
Power Consumption: 10W
Mains Connection: Standard IEC
Physical Dimensions: 482 x 165 x 47 mm (LxWxH)
Weight: 2,32 kg
Er is nog geen review geschreven.
Misschien bent u nu de eerste ?
Schrijf een review