DAP D2192 SessionMix 12

• 12-Channel inputs
• 4 mono MIC inputs
• 4 stereo Line Inputs
• Extremely high headroom offering enough dynamic range
• Extra low distortion pre-amp section
• Better performance with excellent noise figures
• High quality potentiometers & smooth faders
• Robust construction for long time operation
• 19" rack mount set included
• Foot-switch for effect remote control
• 48V Phantom power switch (on backside)

19" rack mount set included

4 Microphone Channels, each channel with:
• Gold plated XLR connector and 1/4" Jack are both provided for the Mic signal inputs
• Up to 40 dB range Trim control
• Low cut switch at 75 Hz, with 18 dB/oct. slope
• Insert facility for extra signal processing
• Warm, natural 3 bands EQ, with the MID centre frequency sweepable
• AUX send buses for external effects or monitoring
• AUX-1 can be switched between post-fader and pre-fader
• AUX-2 can be changed to pre-fader
• Peak LED
• Mute/ALT 3-4 output bus option
• Solo function for level setting

4 Stereo Channels, each channel with:
• Only Left input for mono application
• Operating level switch: +4 dBu for professional equipment inputs, and -10 dBV for HIFI
• 3 Band EQ with the sophisticated centre frequency
• AUX-1 can be switched between post-fader and pre-fader
• AUX-2 can be changed to pre-fader
• Peak LED
• Mute/ALT 3-4 output bus option
• PFL Solo function for level setting

MAIN Section:
• Track inputs, with its independent level control, assignable to Main Mix bus or Control Room/Headphone output
• Stereo AUX Returns can be used as the additional line inputs
• 2x12 segment LED ladder for output level display
• Main Mix source matrix: ALT 3-4 and 2-Track
• Control Room source matrix: Main Mix, ALT 3-4 and 2-Track
• Balanced TRS and XLR outputs

Mono input channels:
Mic 1-4 input: Electronically balanced
Frequency response: 20 Hz - 22 kHz, +/- 1 dB
Distortion (THD +N): <0,03% at +0 dB, 1 kHz
Gain Range: 0 dB - 40 dB (Mic)
SNR: >85 dB
Line input: Electronically balanced
Sensitivity range: +15 dB ~ -25 dB

Stereo input channels:
Line input: Electronically balanced
Frequency response: 20 Hz - 22 kHz, +/- 1 dB
Distortion (THD +N): <0,03% at +0 dB, 1 kHz

Impedance's:
Input impedance: 10 kilo-Ohm
Out impedance: 120 Ohm
Tape out: 1 kilo-Ohm

Equalisation:
Hi shelving: +/- 15 dB @ 12 kHz
Mid bell: +/- 15 dB @100 Hz -8 kHz (Mic Ch.)
+/- 15 dB @ 3 kHz & 500 Hz (Stereo Ch.)
Low shelving: +/- 15 dB @80 Hz
Low cut filter: 75 Hz, 18 dB/oct.

Main mix section:
Max. output: +22 dB u balanced XLR
+16 dB u unbalanced, 1/4 jacks
AUX return gain range: Off to +15 dB
AUX sends max. out: +15 dB

Power supply:
Input voltage: 210-240V, 50 Hz
Power consumption: 65 W

Dimensions: 315 x 436 x 86 mm (WxDxH)
Weight: 5,1 kg

Er is nog geen review geschreven.
Misschien bent u nu de eerste ?
 

Schrijf een review